Ohuhu Matte Aluminum License Plate Frame with Black Screw Caps, 2Pcs 2 Holes Black Licenses Plates Frames, Car Licenses Plate Covers Holders for US Vehicles

Features:
  • For U.S. license plate: This Black License Frame size is 6-3/8" x 12-1/4"
  • Strong & rust-free Plate Frame - Crafted with high quality aluminum, but NOT cheap plastic
  • Simple installation with vehicle's existing 2 license plate fasteners (screws and matching screw covers included)
  • This Car Matte Aluminum Licence Plate frame is designed not to block registration tags in all four corners in most states
  • Powder coated Black Matte Finish, this 2 holes Car Licence Plate will never peel off
Real Simple

Super clean and simple frame. Just what I was looking for. It’s really light and it covers up the bottom holes of a CA plate perfectly. I re-used the screws already installed so I can’t comment on the screws and caps it comes with

Well made and they look great on the car

Just put these (well, one) on my black Q50S. I'm very happy with them. One of the frames has slight imperfections in the form of a couple tiny raised bubbles maybe 2mm in diameter. It's noticeable when you look closely but basically invisible standing a couple feet back from the car. The other frame was without any defects at all. Since I only use the rear plate (until CHP yells at me, that is) I went with the latter with no defects. The color is a very close match to the obsidian paint. Though the plate frames don't stand out and blend in with the body, they do a great job of smoothing the edges and corners of the license plate for an overall sleeker look. One small nit is the washers are made of a softer plastic. It was a challenge to tighten the screws and keep the washers centered. Hardly a big deal, I just had to use my free hand to recenter the washers as I tightened the screws. Additionally, a couple of the screw caps showed a little extra plastic tab from where they were punched out of the sheet used during production. Again, not a big deal. Overall, I'm very satisfied - especially for the price. Now let's see how they hold up in SoCal UV over the summer...

Stylish

Best part I like about these that I didn’t realize about them when I made the purchase is that they come with caps to cover the screws. Yes, it makes the look seamless, but more than that is it’s another small step that will help keep my license plates on my car. My car sitting next to another with visible screws = theif will go after the other car’s plates because getting them off requires less work and will be faster

Awesome product!

I wanted a blank frame so I could customize it for my Subaru and this worked perfectly.

Lovely product

This product worked perfectly well on my 2006 Chrysler 300 Hemi C. It has a premium feel to it, matte black with plenty of fillers and connectors that can adapt to several fittings. They even included a Phillips head screwdriver. Installation was easy and took at most 3 minutes for front and rear of the vehicle. I put the screw covers on and will be able to remove them for re-installation when I get new plates next year. I don't know what some reviewers are saying that you can't remove them once installed. They'll work perfectly fine. I did have to use other screws with just a larger bore but that was due to my car's bumper. The previous owner had used a larger bore screw in the holes, so I had to keep that same bore. Excellent product!

Nice, Simple, Tasteful, & Functional: for Those Who Don't Need or Want Their Cars to Be Rolling Ads.

Nice, subdued tag frames that are holding up well, so far. I bought these because my preferred car wash had started grabbing the edge of my front tag and was folding it pretty well by the time the wash cycle was finished. It was getting progressively worse - to the point it looked like the tag might crack soon it kept happening. After watching, car with tag frames didn't seem to have this issue. I didn't want anything very flashy and didn't want my car to be a rolling billboard for my school, for how much I love dogs or cats - or pizza or the beach or hockey or whatever (I do love this stuff, but figure it doesn't need to be trumpeted to strangers, right? :) ), or to advertise my military service (I have that, too, and am proud of it but don't think I need to broadcast that, either). I just wanted something simple, tasteful, and functional. These have been perfect - couldn't ask for anything better! They're easy to install, have been laughing at the car wash, so far, and are wearing really well overall. Great tag frames! Highly recommend! Update - 11/24/2018: these tag frames look and work great. They’re nice and light, yet solid enough that they do a great job of protecting my front tag in a car wash that’s known for ripping tags off (a trade off since it cleans the best). I like these so much that bought a second set for another car in August. They’re every bit as good as the original set on the first car. Highly recommend!

GOOD PRODUCT AND NICE LOOK

WELL WHAT CAN I SAY FOR A LICENSE PLATE FRAME. IT DIDN'T ADD THE 50HP TO MY CAR THAT YOU MIGHT BE THINKING. BLASPHEMY RIGHT, HOW DATE A LICENSE PLATE NOT ADD HORSE POWER. HOWEVER THE MATERIAL OF THE FRAME SI GREAT AND THE EASE OF INSTALLATION WAS PERFECT. YOU DEFINITELY DO NOT NEED TO BE A MECHANICAL ENGINEER TO INSTALL THIS. YOU DONT EVEN NEED TO HAVE A HIGH SCHOOL DIPLOMA FOR IT. HOWEVER KNOWING HOW TO READ WILL GET YOU A LONG WAY. HECK EVEN IF YOU DONT KNOW HOW TO READ JUST GET YOUR PACKAGE DELIVERY GUY TO HELP YOU. IT TOOK ALL BUT 2 MINUTES. GOOD PRODUCT, GREAT PACKAGING, AND PROVIDES AN OVERALL NICE LOOK.

Terrific License Plate Frames

These are great! An elegant touch vs. bright finishes and/or cutesy slogans. These come with special washers and caps, same finish as plate frame, and which finish these off nicely, and easily attach affirmatively (once you figure out which way the washers go!). So when you're done, you don't see the screws. Just the caps. Way cool, as the kids say. Very reasonably priced and highly recommended. Just as advertised.

I really liked the finish of the black screw covers

Installed a 2016 Jeep Wrangler Sahara Unlimited front plate mount, and was looking for a plate frame. This matte black frame with 2 screw slots on top aligned perfectly. This set includes boat loads of hardware and even a little screwdriver thingy that will end up in a drawer until eternity. I really liked the finish of the black screw covers, very clean look. I also used the included hardware on my rear plate, which already had a factory plate frame embedded. Highly recommend. Fast shipping, great packaging, more hardware than you can shake a stick at.

Worth every penny.

Features:
  • For U.S. license plate: This Black License Frame size is 6-3/8" x 12-1/4"
  • Strong & rust-free Plate Frame - Crafted with high quality aluminum, but NOT cheap plastic
  • Simple installation with vehicle's existing 2 license plate fasteners (screws and matching screw covers included)
  • This Car Matte Aluminum Licence Plate frame is designed not to block registration tags in all four corners in most states
  • Powder coated Black Matte Finish, this 2 holes Car Licence Plate will never peel off
Real Simple

Super clean and simple frame. Just what I was looking for. It’s really light and it covers up the bottom holes of a CA plate perfectly. I re-used the screws already installed so I can’t comment on the screws and caps it comes with

Well made and they look great on the car

Just put these (well, one) on my black Q50S. I'm very happy with them. One of the frames has slight imperfections in the form of a couple tiny raised bubbles maybe 2mm in diameter. It's noticeable when you look closely but basically invisible standing a couple feet back from the car. The other frame was without any defects at all. Since I only use the rear plate (until CHP yells at me, that is) I went with the latter with no defects. The color is a very close match to the obsidian paint. Though the plate frames don't stand out and blend in with the body, they do a great job of smoothing the edges and corners of the license plate for an overall sleeker look. One small nit is the washers are made of a softer plastic. It was a challenge to tighten the screws and keep the washers centered. Hardly a big deal, I just had to use my free hand to recenter the washers as I tightened the screws. Additionally, a couple of the screw caps showed a little extra plastic tab from where they were punched out of the sheet used during production. Again, not a big deal. Overall, I'm very satisfied - especially for the price. Now let's see how they hold up in SoCal UV over the summer...

Stylish

Best part I like about these that I didn’t realize about them when I made the purchase is that they come with caps to cover the screws. Yes, it makes the look seamless, but more than that is it’s another small step that will help keep my license plates on my car. My car sitting next to another with visible screws = theif will go after the other car’s plates because getting them off requires less work and will be faster

Awesome product!

I wanted a blank frame so I could customize it for my Subaru and this worked perfectly.

Lovely product

This product worked perfectly well on my 2006 Chrysler 300 Hemi C. It has a premium feel to it, matte black with plenty of fillers and connectors that can adapt to several fittings. They even included a Phillips head screwdriver. Installation was easy and took at most 3 minutes for front and rear of the vehicle. I put the screw covers on and will be able to remove them for re-installation when I get new plates next year. I don't know what some reviewers are saying that you can't remove them once installed. They'll work perfectly fine. I did have to use other screws with just a larger bore but that was due to my car's bumper. The previous owner had used a larger bore screw in the holes, so I had to keep that same bore. Excellent product!

Nice, Simple, Tasteful, & Functional: for Those Who Don't Need or Want Their Cars to Be Rolling Ads.

Nice, subdued tag frames that are holding up well, so far. I bought these because my preferred car wash had started grabbing the edge of my front tag and was folding it pretty well by the time the wash cycle was finished. It was getting progressively worse - to the point it looked like the tag might crack soon it kept happening. After watching, car with tag frames didn't seem to have this issue. I didn't want anything very flashy and didn't want my car to be a rolling billboard for my school, for how much I love dogs or cats - or pizza or the beach or hockey or whatever (I do love this stuff, but figure it doesn't need to be trumpeted to strangers, right? :) ), or to advertise my military service (I have that, too, and am proud of it but don't think I need to broadcast that, either). I just wanted something simple, tasteful, and functional. These have been perfect - couldn't ask for anything better! They're easy to install, have been laughing at the car wash, so far, and are wearing really well overall. Great tag frames! Highly recommend! Update - 11/24/2018: these tag frames look and work great. They’re nice and light, yet solid enough that they do a great job of protecting my front tag in a car wash that’s known for ripping tags off (a trade off since it cleans the best). I like these so much that bought a second set for another car in August. They’re every bit as good as the original set on the first car. Highly recommend!

GOOD PRODUCT AND NICE LOOK

WELL WHAT CAN I SAY FOR A LICENSE PLATE FRAME. IT DIDN'T ADD THE 50HP TO MY CAR THAT YOU MIGHT BE THINKING. BLASPHEMY RIGHT, HOW DATE A LICENSE PLATE NOT ADD HORSE POWER. HOWEVER THE MATERIAL OF THE FRAME SI GREAT AND THE EASE OF INSTALLATION WAS PERFECT. YOU DEFINITELY DO NOT NEED TO BE A MECHANICAL ENGINEER TO INSTALL THIS. YOU DONT EVEN NEED TO HAVE A HIGH SCHOOL DIPLOMA FOR IT. HOWEVER KNOWING HOW TO READ WILL GET YOU A LONG WAY. HECK EVEN IF YOU DONT KNOW HOW TO READ JUST GET YOUR PACKAGE DELIVERY GUY TO HELP YOU. IT TOOK ALL BUT 2 MINUTES. GOOD PRODUCT, GREAT PACKAGING, AND PROVIDES AN OVERALL NICE LOOK.

Terrific License Plate Frames

These are great! An elegant touch vs. bright finishes and/or cutesy slogans. These come with special washers and caps, same finish as plate frame, and which finish these off nicely, and easily attach affirmatively (once you figure out which way the washers go!). So when you're done, you don't see the screws. Just the caps. Way cool, as the kids say. Very reasonably priced and highly recommended. Just as advertised.

I really liked the finish of the black screw covers

Installed a 2016 Jeep Wrangler Sahara Unlimited front plate mount, and was looking for a plate frame. This matte black frame with 2 screw slots on top aligned perfectly. This set includes boat loads of hardware and even a little screwdriver thingy that will end up in a drawer until eternity. I really liked the finish of the black screw covers, very clean look. I also used the included hardware on my rear plate, which already had a factory plate frame embedded. Highly recommend. Fast shipping, great packaging, more hardware than you can shake a stick at.

Worth every penny.

Worth every penny. I pulled the dealer frames off because I don't want their name on my car. But then the carwash kept snagging my front plate and bent the heck out of it. These have a nice matte finish and are good quality, especially for the price. Do yourself a favor and read the instructions first. They have an alternative way of mounting this other than just jamming a screw in there like I did.

Full Reviews
dow: none;"> Worth every penny. I pulled the dealer frames off because I don't want their name on my car. But then the carwash kept snagging my front plate and bent the heck out of it. These have a nice matte finish and are good quality, especially for the price. Do yourself a favor and read the instructions first. They have an alternative way of mounting this other than just jamming a screw in there like I did.

Full Reviews

Comments

Post a Comment

Popular posts from this blog